Electrodes and Welding Rods




Related Products
   
Ideal - 40
STAR ARC - 6013
Ideal - 50
Ideal - 60
 
Ideal - 7014
Ideal - 7016
Ideal - 7018
Ideal - NICKEL
Ideal - MONEL
Ideal - FERRO NICKEL
Ideal - C.I.MACH
Ideal - CAST
Ideal – 308
Ideal – 308 L
Ideal – 309
Ideal – 309 L
Ideal – 310
Ideal – 316
Ideal – 316 L
Ideal – 318
Ideal - 250
Ideal - 350
Ideal - 650
Ideal - CUT
Ideal - CEL
 







 

Hard Facing Cutting Cellulosic :

Ideal - 650 LH

ideal-electrodes-650LH

A medium heavy coated, low hydrogen air hardening type electrode for hardfacing applications. Produces extremely hard, sound and non-machinable welds. Due to low hydrogen coating it can be used on high carbon and high sulphur steel without inducing under bead cracking or porosity. The deposit can be finished by grinding only. For welding of oil expeller worms, pan mixer blades, stone crushers jaws, muller tyres, screw conveyors, cement die rings, hot and cold punching dies, crane wheels, caterpillar treads, mine rails, shear blades, bamboo chipper knives, croppers etc.


Ideal - MANGAN

ideal-electrodes-mangan

A medium heavy coated, low hydrogen work hardening type electrode for hardfacing application on austenitic Mn steel parts like stone crusher jaws, dredger bucket teeth, etc. where resistance to impact is necessary. The weld deposit consist of 12% Mn steel which has 200 Brinell hardness which increases to over 500 brinell under severe impact in service. For welding of rock crushing jaws, manganese steel rails, dredger bucket teeth cement grinding  rings, mining, various parts of earth moving equipments, muller tyres hammers etc.

Ideal - CUT

It is a specially developed electrode versatile in cutting, goughing and other related operations. A powerful arc with negligible slag enable rapid cutting. It can be used in all positions since the kerfs are narrow. Eminently suitable for burning out rivets, as also for removing risers and runners from foundry castings. Applicable for cutting and piercing of alloy steels, cast iron, copper and aluminium.

Ideal - CEL - AWS: E 6010

It is a medium coated, all position, cellulosic coated electrode with a forceful, penetrating arc and a thin brittle slag. Gives a flat bead with melting rate. The weld metal is highly ductile and of radiographic quality. Suitable for all position work. For welding of pipelines, pressure vessels, tanks, structurals, field work where good penetration is necessary in all positions. Good fit-up joints necessary. Specially suited for pressure pipelines which cannot be welded from inside.

Mechanical Properties
UTS-N/mm²
E%
°C/J
450
24%
0/50

 

     








 

 

 

 

 

 

 

 

 

 

 

 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Designed By Bulkspace4u.com